IP Master Station Kit PCB
Model: 1008093000
- Master station PCB made for Critical Communication over IP (CCoIP®) in custom made station housings
- Superb audio technology - gives loud-speaking hands-free duplex communication from any location in the room
- Remote software upgrade, configuration and monitoring
- Integrated data switch with advanced networking and security functions
- Powered from the IP network cable using Power over Ethernet (PoE)
The IP master station kit provides up to 1.5W audio output. If even higher audio output is required an external power amplifier can be used. As a special function, the PCB can extract power from the Ethernet’s PoE circuit and give up to 6W power to external units. This means that the PCB can power an external power amplifier using its own PoE.
The PCB has one relay output and three logical inputs. These outputs can for instance be used to control and open a door or PA interface. The operation of the outputs and inputs are programmable and controlled by the AlphaCom E exchange.
- Master station PCB made for Critical Communication over IP (CCoIP®) in custom made station housings
- Superb audio technology - gives loud-speaking hands-free duplex communication from any location in the room
- Remote software upgrade, configuration and monitoring
- Integrated data switch with advanced networking and security functions
- Powered from the IP network cable using Power over Ethernet (PoE)
- Supports large high contrast display with white backlight for excellent readability
- Supports handset and headset
- Supports full keyboard
- Supports digital inputs and output via built-in relay
- Supports external audio amplifiers
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Active Power: 13 Watt
- DC Voltage: 27 Volts
- Standby Power: 4 Watt
- Depth: 0.79 in
- Height: 5.98 in
- Width: 3.46 in
- Product Weight: 0.55 lbs
- Warranty (Length/Type): 2 Years Limited
- Humidity: 10 to 85%, non condensing
- Mounting: Locally made housing
- Power:
- Power over Ethernet, IEEE 802.3 a-f, Class 0
Local 19-27 VDC power
Idle 4 W, max. 13 W (ext. amplifier)
6W power out to external units - Connectors:
- :
Ethernet: 2 x RJ45 10/100 Mbit/sec
Handset: RJ11
Headset: RJ11
Microphone: 3-pin plug (Electret, dynamic)
Loudspeaker: Plugable screw terminal (1.5 W, 8 Ohm)
24V DC in, 1 relay out: 6-pin plugable screw terminal
LED, 3 inputs: 6-pin plugable screw terminal
Gooseneck microphone: 3-pin IDC (Electret)
Display: 20-pin ZIF
Keyboard: 18-pin ZIF + solder holes (Digits 0-9 + M and C, 10 DAK, 4 softkeys, volume control, backlight control)
Audio Out: 6-pin IDC (0 dB / 600 Ohm, 13 V power out)
I2C bus: 6-pin mini (DAK modules, relay modules etc. +3.3 V power output)
Suggested Products
Tech Electronics
6437 Manchester Ave
St. Louis, MO 63139
USA
314-645-6200
http://www.techelectronics.com