5-button Tamper and Vandal Proof Intercom Station
Model: 1007063000
- Analogue intercom station specially designed for prison and correctional facilities
- Advanced safety solution including scream, assault and tamper alarms
- Vandal proof design with 2.5 mm steel front, sensor buttons, microphone/speaker protection and water resistant
- Music distribution with volume control
- Integrated light signaling system
Call request form the cell, guard presence and alarm calls are indicated on the guard’s intercom station as well as by signal lamps outside the cell and in the guard room. The station works in a dual redundant mode. If the link to the intercom exchange fails, the lamp signaling will still work. If the lamp signaling fails, all intercom signaling will remain intact. The sensitivity of the vandal proof sensor buttons can be set to ‘normal’ or ‘high’, where the latter is intended for use by guards wearing rubber gloves. In order to keep the sensitivity at the correct level, the stations must be installed in a dry, indoor location. For cleaning purposes, the station is protected to IP 65; fluid will not harm the station, but operation is only optimal when the surface is dry again.
- Analogue intercom station specially designed for prison and correctional facilities
- Advanced safety solution including scream, assault and tamper alarms
- Vandal proof design with 2.5 mm steel front, sensor buttons, microphone/speaker protection and water resistant
- Music distribution with volume control
- Integrated light signaling system
- Integrated cell light button and switch
- Programmable I/O ports for controlling door status, lamps, TV sets, sensors and more
- Redundant backup for power and signaling
- Warranty - Yes
- Spec Sheet available - Yes
- Finish: 2.5 mm brushed stainless steel
- Mounting: Flush in back box, 6 tamper proof screws
- Button: Vandal proof sensor type
- Gen. purp. I/O ports: 3 x input - contact closure, 2 x output - 24 VDC/1 A
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 10000 Hz
- Maximum Frequency Response (Bandwidth): 10 kHz
- Minimum Frequency Response (Bandwidth): 200 Hz
- Minimum Frequency Response (Bandwidth): 0.20 kHz
- Wireless: No
- Active Power: 1 Watt
- Current Draw: 1 Amps
- DC Voltage: 24 Volts
- Depth: 2.01 in
- Height: 10.39 in
- Width: 5.04 in
- Product Weight: 2.10 lbs
- Warranty (Length/Type): 2 Years Limited
Suggested Products
Tech Electronics
6437 Manchester Ave
St. Louis, MO 63139
USA
314-645-6200
http://www.techelectronics.com