8-inch enhanced pattern-control two-way coaxial ceiling loudspeaker system provides much better music fidelity and speech intelligibility in spaces with high ceiling heights. Its 75° coverage pattern provides the same coverage area when used in 21ft ceiling as typical flush mount mounted unit in an 8ft ceiling. This loudspeaker system is a complete two-way ceiling loudspeaker package. The package consists of bezel/waveguide assembly, grille, rear enclosure, 8-inch coaxial two-way loudspeaker with waveguide coupled titanium coated dome tweeter and internal line-matching transformer. It utilizes transformer that offers selection of 7.5 (70V only), 15, 30 or 60W delivered to the loudspeaker system using either 70 or 100V lines or 8 Ohms bypass. Selection is via a convenient switch on the front of the waveguide. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure with fiberglass damping material provides an optimum internal volume for extended low-frequency performance. A rear cover with provisions for junction box fitting provides access to 4-pin terminal block that allows direct connection to the speaker with 12-gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2HC ceiling system in drop ceiling that uses mineral wool or other fiber-based ceiling tiles. They provide controlled dispersion, high-efficiency, high-maximum output, ease of installation and wide-range reproduction of music or voice.
Maximum fidelity and intelligibility for high ceilings
Ported enclosure for extended bass response
Waveguide-coupled 1-inch titanium coated tweeter
Full-bandwidth overload protection
Integrated low loss matching transformer allows for either 70/100V or 8 Ohms operation
Front-panel mode/wattage selector
Internally damped heavy-gauge steel enclosure
Safe, easy installation with included tile bridge and mounting ring
White semi-gloss perforated grille
Complete package, requires no additional accessories
Loudspeaker Mount Type - Ceiling
Transformer Option - Yes
Loudspeaker Voltage - 70V
Loudspeaker Voltage - 100V
Spec Sheet available - Yes
Speaker Diameter (Driver):
12.60 in
Maximum Frequency Response (Bandwidth):
20 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
50 Hz
Minimum Frequency Response (Bandwidth):
0.05 kHz
100V Taps:
15, 30 or 60 Watt
70V Taps:
7.5, 15, 30 or 60 Watt
Power Handling:
75 Watt
Sensitivity:
93 dB
Transformer Option:
Yes
Chassis Size:
8 in (203.2mm)
Nominal Coverage (Conical):
75 ° (above 1kHz)
Nominal Impedance:
8 ohms (transformer bypass)
Maximum Continuous Calculated SPL:
112 dB
Maximum Peak Calculated SPL:
118 dB
LF Transducer:
8-inch (203.2mm)polypropylene cone plus waveguide
HF Transducer:
1-inch (25mm) Ti Mylar laminate dome
Connector:
Phoenix type removable with screw terminals and loop-through, accepts 12-gauge wire
Enclosure Material:
Steel enclosure and UL94V-0 rated baffle and bezel
Grille:
Powder-coated steel
Color:
White
Peak Power:
300 Watt
Height:
11.90 in
Shipping Weight:
30 lbs
Product Weight:
13.20 lbs
EVID C10.1
- 10-inch High-power Ceiling Subwoofer System