The DS-10 is a desktop networked paging station for use in Vocia® systems. The DS-10 features embedded DSP and on-board memory to support standard and advanced public address functionalities. The DS-10 can store 999 user-configurable page codes. Additionally, all device-specific configuration information is stored locally, which means the DS-10 does not rely on a centralized controller for processing and page routing. Thus, the processing, routing and storage functionality in a Vocia system is decentralized, which eliminates any centralized point of failure. As part of the Vocia system, the DS-10 meets paging requirements for facilities of all sizes.
Push-to-talk button with status indication
Up to 999 user-configurable page codes
Eight priority levels: four regular priority levels,
four emergency priority levels
Local digital signal processing, including gain,
filters and compressor/limiter
Local storage of configuration data
Local storage of default and/or custom preambles
Built-in store and forward functionality
CobraNet® audio/control with dynamic use of available bundles, plus power over single Ethernet cable
Backlit liquid crystal display (LCD) technology
Optional PIN to restrict unauthorized use
High-quality gooseneck cardioid microphone
Sturdy component housing
Rotary ID switches for unit identification
The microphone is a dynamic type with two transducers. The primary (microphone) transducer is constantly monitored for ambient signal. In low ambient conditions, the secondary transducer is energized with an inaudible tone to emulate ambient noise
CE marked and RoHS compliant
Covered by Biamp Systems’ warranty
Polar/Pickup Pattern - Cardiod
Microphone Type - Other
Spec Sheet available - Yes
Depth:
7.40 in
Height:
2.10 in
Width:
9.50 in
Product Weight:
3.08 lbs
Frequency Response (electronics):
+0,-1dB, 100Hz to 20kHz
Effective Input Headroom:
30dB
Gain:
Adjustable in 1dB steps over a 30dB range
System Headroom:
18dB
Maximum Input:
125dB SPL
THD + N (100Hz to 8kHz):
<0.05%
MIC type:
Dynamic microphone with dual transducer (monitored)
Mic Pattern:
Cardioid
Mic Frequency Response:
100Hz-10kHz
A/D Converters:
24-bit (48kHz sampling)
Connection:
RJ45 with shielded Ethernet/PoE cable (CAT5, CAT5e,CAT6, or CAT7)
PoE Power:
802.3af (PoE) Class 2
PTT:
Swtich contact between pin and ground
12V DC Out:
50Ma
RS-232:
57600 kbps
Balanced Line In:
-10dB Nominal
Input Impedance:
3k ohms
Mic Gooseneck Length:
12.5 inches (317.5mm)
Ambient Operating Temperature Range:
32-113 degrees F (0-45 degrees C)
Compliance:
EU Directive 2002/95/EC; RoHS Directive; CE marked